Modern upholstered headboard – Upholstered headboards not only create a pleasant backdrop for a bed, they provide presence, a way to create the look of the furniture without the expense. Measure and mark the center of each edge of your plywood and furniture fabric, by means of a marking pen. Mark within 3 inches of the edge of the fabric so that the mark will not be visible.
Place the plywood on a flat surface in a well ventilated area and attach batting to the plywood using spray adhesive. Let the overhang edges batting surface, as they will be folded back when the substance is used modern upholstered headboard. Place the fabric flat, pattern side down, on your work surface. Place the plywood and batting on top of the fabric with batting facing fabric. Match the centers of the substance together and plywood.
12 Photos Gallery of: DIY Modern Upholstered Headboard
Pull the fabric around the back on the upper surface of the plywood, surrounds the additional batting, which fold. Staple the fabric down on the center mark, make sure you go through the fabric, batting and into the back of plywood, placing short about 1 cm from the edge of the fabric. Do the same on the opposite side of the headboard and pulled the fabric taut at the midpoint mark and stapling of fabric and batting to the back of the plywood. Continue on the other two sides of plywood, pulling the fabric taut and staple it down to secure the fabric and batting to all edges of the back of the plywood for modern upholstered headboard.